2500 Ram Cummins

Many Dodge Ram 2500 Cummins heavy duty pickup truck drivers are extremely proud of their trucks and the incredible power of their 2500 Cummins combination. Since these Ram 2500 Cummins owners are rightfully concerned to treat their trucks right, some ask if fuel or oil additives are recommended for use with their Cummins B-Series 5.9-liter Turbo Diesel. The fact is that fuel or oil additives in the Dodge Ram 2500 Cummins Turbo Diesel motor are not required, nor overly necessary on this 2500 Cummins diesel mill, provided that the specifications recommended by the Cummins factory manuals are followed. This will ensure that the Ram 2500 Cummins will provide ongoing performance and durability.

2500 Ram Cummins Engine Equals Power

Of course it is always important to consult the Dodge 2500 Ram Cummins owner's manual in order to be up to date on all the proper guidelines to be applied to the operation of the Ram 2500 Cummins, and the guidelines listed there are to be considered the official Dodge 2500 Cummins recommendations. Coolant additives are used in many diesel engines in order to protect liners from the deleterious effects of cavitation. However, since the Cummins B-Series 5.9-liter Turbo Diesel engine installed in the Dodge 2500 Ram Cummins heavy duty pickup trucks has no liners, the 2500 Cummins engine does not require any form of coolant additive.

Dodge Ram 2500 Cummins Does It All

Cummins furthermore recommends that the owner of a Dodge Ram 2500 Cummins heavy duty pickup truck with a Ram Cummins B-Series 5.9-liter Turbo Diesel does not use any form of synthetic motor oil in the first period of approximately 5,000 to 20,000 miles which can be considered the break-in time for a new Ram 2500 Cummins engine. The length of time for the break-in of the 2500 Cummins engine is generally based on the driving style of the individual operator and is set to allow the piston rings to properly seat. Once the engine has completed its break-in period, Cummins allows the use of synthetic oil in the Cummins B-Series 5.9-liter Turbo Diesel. That oil recommendation is a factor that few Dodge Ram 2500 Cummins owners are aware of!

Dodge Ram 2500 Cummins Turbo Diesel Is The #1 Choice

The Dodge Ram 2500 Cummins Turbo Diesel is easy to own and to maintain. The only other official requirements set by the Cummins factory is that when an owner is breaking in a Ram 2500 Cummins B-Series 5.9-liter Turbo Diesel is that the fluids be meticulously kept topped up and that a petroleum motor oil (and not a synthetic) be introduced into the crankcase for the first two oil change intervals. That will ensure a proper break-in procedure for any Dodge Ram 2500 Cummins Turbo Diesel.

Dodge Ram 2500 Cummins Diesel Break-In

Cummins engineers also recommend that the Dodge Ram 2500 Cummins Diesel engine not be idled for a period that exceeds 5 minutes, nor kept for extended periods of time at the same RPM through the break-in period. Some Dodge Ram 2500 Cummins Diesel heavy duty truck owners also mistakenly believe that adding a second fuel filter would provide additional more protection for their Cummins B-Series 5.9-liter Turbo Diesel. That is one of the most persistent misconceptions about the Ram 2500 Cummins Diesel.

Dodge Ram 2500 Cummins Diesel Fuel Filter

That is not the case with the Ram 2500 Cummins Diesel as it is not necessary to install a second fuel and water separator unit. This is due to the fact that the Dodge fuel filters are already equipped with a properly functional water separator. The addition of a second filter could conceivably cause excessive restriction in the fuel inlet restriction which would have a deleterious effect on low speed operation and performance of the Dodge Ram 2500 Cummins Diesel.

©2010 - WholesaleCarsDirect, Inc. Terms of Service | Privacy | Site Map |     

Car Dealer SEO by